Motor Solenoids (Pair) DC88-1017PL (24v)

The DC88P series of contactors has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks. The DC88P is a monoblock construction, resulting in a neat compact design which is compatible with modern electronic control systems.

Developed for both interrupted and uninterrupted loads, the DC88P is suitable for switching Resistive, Capacitive and Inductive loads. The DC88P is sealed to IP66 thus offering greater protection against adverse environments such as water or dust.
• Interrupted current – opening and closing on load with frequent switching (results in increased contact resistance).
• Uninterrupted current – no or infrequent load switching requirements (maintains a lower contact resistance).

The main contact circuit, designed for motor reversing, has a built in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuit. The DC88P has double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity. The DC88P M8 main stud terminals can be configured in a variety of ways in order to suit the application. Coil connections are by means of 6.3mm spades DC88P and mounting is via the supplied bracket and can be horizontal
or vertical, when vertical the M8 contact studs should point upwards.